Canon AE-1 User Manual
Page 77
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
observed on the screen. When the stopped-
down lever's release button is pressed, full
aperture metering will be restored.
3.
After having turned the aperture ring to
the maximum f/stop on the lens, reset it to
the "A" mark. Otherwise, you will not be able
to obtain the correct automatic exposure for
the next shot.
Stopping-down of the FD lenses should
only be done after advancing the film.
Should you not advance the film, the
stopping-down of the lens diaphragm would
43
Advertising