Pre-recording – Canon HF S21 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pre-Recording
The camcorder will start recording 3 seconds before you press
START/STOP
, ensuring you do not miss important shooting opportuni
ties. This is especially useful when it is difficult to predict when to start
recording.
Operating modes:
1 Activate the pre-recording function.
[FUNG.]
['i Pre REG]
[EJI
On]
• '© appears.
• Repeat, selecting
[ESI
Off], to turn off pre-reoording.
2 Press I
START/STOP .
The soene reoorded in the memory will start 3 seoonds before
[sTART/STOP
was pressed.
While pre-reoording is aotivated, the oamoorder will not emit any notifi-
oation sounds.
The oamoorder will not reoord the full 3 seoonds prior to pressing
START/STOP
if the button was pressed within 3 seoonds of having
turned on pre-reoording or having finished the previous reoording.
Any of the followina notions will deaotivate the pre-reoording funotion.
- Leaving the oamoorder without any operation for 5 minutes.
- Pressing |'■5:[g or
(
video
snap
] .
- Changing me position of the mode switoh.
- Changing the oamoorder's operating mode.
- Setting the oamoorder to standby mode.
- Changing any of the setup menu settings or ohanging the following
settings in the FUNC. panel: [Reo. Programs], [White Balanoe], [AGC
Limit], [Digital Effeot] or [Image Stabilizer],
66
♦ Video