Canon 580EX - Manual (Page 51)

The flash range scale bars blink.
• The flash head has been tilled down by 7°
► Change the bounce position, (p.19)
The periphery or bottom of the picture looks dark.
When you set the flash coverage manually, the setting was a higher
number than the lens focal length, resulting in a dark periphery.
Set the flash coverage that is a lower number than the lens focal length or
set rt to auto zoom. (p.20)
If only the bottom of the picture looks dark, you were too close to the
subject.
If the subject is closer than 2 m/6.6 ft, tilt the flash head downward by T.
(p-19i
The flash exposure is underexposed or overexposed.
There was a highly reflective object (glass window, etc.) in the picture.
Use FE lock, (p.16)
The subject has a very dark or light color.
Set Hash exposure compensation. For a dark subject, set a decreased flash
exposure. And lor a bright subject, set an increased flash exposure. (p.14)
You used high-speed sync.
With high-speed sync, the effective flash range will be shorter. Make sure
Ihe subject is within the effective Hash range displayed, (p.17)
I
The picture is really blurred.
• The shooting mode was set to < Av:>, and Ihe scene was dark.
► Use a tripod or set the shooting mode to < P >. (p. 12)
49