Quick start guide – Canon EOS Rebel 2000 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Quick Start Guide
1
Install the batteries.
Insert two CR2 lithium batteries
as shown by the battery
orientation diagram on the
battery chamber cover. See
page 16.
2
Attach a lens.
Align the red dots on the lens
and camera and turn the lens
clockwise until it snaps in place.
See page 18.
5
Load the film.
Align the edge of the film leader
with the orange mark on the
camera and close the camera
back until it snaps shut. See
page 20.
• The film will then advance to
the first frame automatically.
THE IMAGE
WAS
REMOVED DUE
TO COPYRIGHT RESTRICTIONS
6
Focus the subject.
Aim the AF frame on the
subject and press the shutter
button halfway to autofocus.
See page 24.
• Under low-light or backlit
conditions, the built-in flash
will fire automatically. See
page 60.