Automatic selection, Press the <d]> button and turn the dial, Manual selection – Canon EOS 1 V HS User Manual
Page 39: 1) manual selection of 45 focusing points
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Focusing Point Selection
Automatic Selection
Press the <d]> button and turn
the
dial.
► Turn the dial until the viewfinder
display is as shown on the left. You
can also turn the <0> dial.
• While in the manual selection mode,
shifting the focusing point beyond the
peripheral focusing point will set the
automatic selection mode.
The automatic selection mode can also
be set while C.Fn-13-1/2/3 has been set.
Manual Selection
(1) Manual selection of 45 focusing points
• Select the focusing point as
described in “Basic Procedure for
Focusing Point Selection.”
□ □ □ 8 □ □ □
□ □ M j M D D D
□ □ 0 !i □ 0 □
When a vertical focusing point is
selected, the selection will alternate
between one ( □ ) and double
focusing points ( □ □ ).
Center focusing point selected. Off-center focusing point selected. Double focusing points selected.
C C
I
J C L
11 If double focusing points are selected, focusing point selection will be automatic
with both focusing points. If you then select the left or right focusing point, only
that focusing point will be active.
39