Take the pictures, Canceling aeb – Canon EOS 1 V HS User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Autoexposure Bracketing
Display for ±1 -stop AEB.
Take the pictures.
• The current film advance mode will
be used.
► The viewfinder’s exposure level scale
will show the respective bracketing
amount as each bracketed shot is
taken.
• In the continuous shooting mode,
holding down the shutter button will
take all three bracketed shots
continuously. The shooting will then
stop automatically.
• When AEB is used with the self-
timer, the three bracketed shots will
be taken in succession after the 2- or
10-second self-timer delay.
^ * T o indicate that AEB is in progress, the ^ AEB icon on the LCD panel and
indicator in the viewfinder will blink until all the bracketed shots are taken.
• In the manual exposure mode, AEB will proceed by changing the shutter
speed.
Canceling AEB
• Follow steps 1 and 2 to set the AEB
to
[].0.
•
AEB will also be canceled by
changing lenses, rewinding the film,
replacing the film, setting a bulb
exposure, having a flash-ready
Speedlite, pressing the <
clear
>
button, and setting the <©> switch
to <OFF>.
No viewfinder information will be displayed during continuous shooting of the
bracketed shots.
After setting the AEB amount, you can also set exposure compensation to
obtain underexposed or overexposed bracketing. See “Setting Exposure
Compensation” on page 67.
AEB cannot be used together with bulb exposures or flash.
If mirror lockup has been set with C.Fn-12 and AEB is used, single-frame shooting
will take effect even if the film advance mode is set to continuous shooting.
70