Canon YJ12X6.5B IRS-A User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When the macro function of the lens is used, macro shooting is enabled.
In macro shooting, the object distance becomes shorter than the normal minimum
object distance (M.O.D.).
The minimum object distance by macro operation for this lens is only 50 mm at wide
end of the focal length and maximum macro position.
5-5. MACRO OPERATION
To operate the macro, manually turn
the macro button at the back of the
Press the macro button to unlock the
macro ring. While holding it down, turn
the macro ring clockwise as viewed
from the camera side to allow macro
1. Set the lens to wide-end by manual
or servo zoom operation.
2. Bring the object into focus by turning
the macro button (macro ring).
Object distance and object dimensions in macro shooting
Position of macro
ring or button
* : The object distance is measured from the front lens vertex.
** : Macro shooting is possible, regardless of where fhe macro ring is positioned between the locked
position and maximum macro rotated position. At the intervening positions, the above data vary.
(NOTE): Macro operation is also possible at any zoom position other than the
wide end of the focal length, but the object distance increases.