Canon EOS 7 - Manual (Page 19)

Installing the Batteries and Checking the Battery Level
Checking the Battery Level
Check the battery level after replacing the batteries and before using the
camera.
Battery Service Life
Turn the Command Dial to a
picture-taking mode.
• Keep pressing the dial’s lock release
button while turning the dial.
• The camera will then turn on and the
LCD panel will display one of the
following battery level icons:
I : Battery level OK.
Q : The battery level is low. Keep
spare batteries handy.
■'S
t
■ batteries will soon be
' completely exhausted.
: Replace the batteries.
''' (^page 7)
(With 24-ex. rolls)
Ambient Temperature 0% Flash Use 50% Flash Use 100% Flash Use
At 20’C 125 rolls 38 rolls 19 rolls
At-20’C 70 rolls 20 rolls 10 rolls
• The Battery Service Life table above is based on Canon’s testing
conditions using an EF 50mm f/1.4 USM lens and new batteries.
W • If nothing is displayed on the LCD panel, the batteries may have been installed
incorrectly. Take out the batteries and install correctly, (-»page 18)
• Pressing the shutter button halfway for a prolonged period or operating only the
autofocus without taking a picture will still consume battery power. It will reduce
the number of rolls that can be taken with the batteries.
0
When not using the camera, set the Command Dial to <®D;
19