How the shutter button works, Ho\w the shutter button works, Pressing the shutter button halfway or completely – Canon EOS 7 User Manual
Page 22: When it is pressed halfway, When it is pressed completely
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How the Shutter Button Works
The EOS camera's shutter button can be depressed halfway or all the way.
There is a click stop at the halfway point.
Pressing the Shutter Button Halfway or Completely
The shutter button works as described below.
When it is pressed halfway:
• Autofocusing Is activated, and when
focus is achieved, the focusing point
flashes and the beeper sounds. The
In-focus indicator <•> on the
viewfinder's lower right also lights.
• Also, the shutter speed and aperture
are set and displayed on the LCD
panel and in the viewfinder.
When it is pressed completely:
• The shutter is released to take the
picture and the film advances by one
frame.
0
Camera movement during the moment of exposure is called camera shake.
Camera shake can cause blurred pictures. To prevent blurred pictures due to
camera shake:
• Hold the camera steady (see page 26).
• Use the center of your finger to touch the shutter button, grasp the camera
with your entire right hand, then press the shutter button gently.
If the AF Mode Dial has been set to <
servo
>• th® in-focus indicator <•> will
not light.
If the AF Mode Dial has been set to <
servo
> and automatic focusing point
selection is set (^page 45). the focusing point will not flash in red.
22