Checking the film speed, Press the – Canon EOS 7 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I Loading ana unioaaing i-nm
W In hot and humid environments, do not remove the film packaging until you are
ready to load the film
0
• If the film is not loaded properly, the < @> icon will blink on the LCD panel and
the shutter will not work. Reload the film cartridge properly.
• Infrared film cannot be used with this camera.
Checking the Film Speed
The camera reads the film cartridge’s DX code and sets the film speed
automatically within ISO 25 - 5000.
• Set the Command Dial to a Creative Zone mode.
Press the
<
func
>
button and
move the <►> arrow to < ISO > on
the LCD panel.
► The film speed will appear on the
LCD panel.
Q If you want to set a film speed different from the DX-coded film speed or if the
film cartridge is not DX-coded, see "Setting the ISO Film Speed ' on page 71.
ram C.Fn-3-1 can prevent the film speed from being set automatically with the DX
code. (->page 88)
24