Setting the date and time, Replacing the quartz date back’s battery – Canon EOS 7 User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Imprinting the Date or Time (QD Model only)

Setting the Date and Time

To set the date or time, follow the procedure below.

Select the date or time display.

• Press the

<

mode

> button.

Select the digit to be set.

• Press the

<SELECT>

button

until

the

digit blinks.

Set the correct number.

• Keep pressing the

<SET>

button until

the correct number appears.

Finalize the setting.

• Keep pressing the <

select

> button

until no digits blink.

Replacing the Quartz Date Back’s Battery

When the date/time on the imprinted photograph looks faded, replace the

CR2025 lithium battery as follows. Battery life is about 3 years.

Remove the battery chamber cover.

• Open the camera back and loosen

the screw as shown in the illustration.

Take out the battery.

Insert a new battery.

• The battery's positive contact (+)

must face up.

Reattach the battery chamber cover.

• Set the correct date and time.

Advertising