Canon EOS 7 - Manual (Page 66)

^Auto Exposure Bracketing (AEB)
"2.1.0.1.2* Correct exposure
"2.1.0.1.2* Underexposure
"2.1.0.1 .2* Overexposure
Take the pictures.
► The bracketed pictures will be taken
in the current film advance mode.
The respective AEB amount is
displayed on the LCD panel and in the
viewfinder for each bracketed shot.
• After the three AEB shots are taken,
the AEB will not be canceled
automatically. To cancel AEB, set the
AEB amount back to " 0.0
О
AEB cannot be used with flash or bulb exposures.
S • In the continuous shooting mode, holding down the shutter button will take all
three bracketed shots continuously. However, the viewfinder will not display the
respective AEB information.
• If the self-timer or remote control is used, the three AEB shots will be taken in
continuous succession automatically.
• If C.Fn-5-1 is sel (mirror lockup), single-frame film advance will take effect
during AEB shooting even if the continuous film advance mode has been set.
• AEB can be used in combination with exposure compensation. If the AEB +
exposure compensation range you set exceeds the displayable range, it will be
displayed as shown below.
In the < P >, < Tv >, < Av >, and < DEP > modes:
: ±1
III
-2.1.0.1.2‘ : ±1
III
-2.1.0.1.2‘ : ±1
■ ■ I
-2.1.0.1.2* :±1
■ ■
! <M> mode:
-2.1.0.1.2* : ±1
■ 1
-2.1.0.1.2*
: ±1
:2.1.0.1.2*
-^1 -
66