Ettl – Canon Speedlite 430EX User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Set the master unit’s flash mode
to
<ETTL>.
• The slave unit(s) will also be
automatically set to
<ETTL>.
Check that the flash is ready.
• When the slave unit is ready to fire,
the AF-assist beam wiil blink once
each second.
Check the flash operation.
• Press the master unit’s test firing
button.
^ The slave unit will fire. If the flash
does not fire, adjust the slave unit's
angle toward the master unit and
distance from the master unit.
Set the camera and shoot.
• Set the camera in the same way as
with normal flash shooting.
Sample wireless flash setup
25
Advertising