Second-curtain synchronization – Canon Speedlite 420EX User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Second-Curtain Synchronization

The EOS 30/ELAN 7E has a Custom Function enabling 2nd-curtain

synchronization.

Normally, 1st-curtain synchronization is set so that the flash is fired when

the shutter curtains fully open. With 2nd-curtain synchronization, the flash

is fired right before the shutter curtains close. When this is combined with a
slow shutter speed, you can capture the light trail following the moving
subject. This looks more natural.

• To set the camera's Custom Function, refer to the camera's Instructions.

The image has been removed due

to copyright restrictions

Taken with 2nd* *curtain synchronization.

The image has been removed due

to copyright restrictions

Taken with 1sl-curtain synchronization.

1

1

Set the Custom Function for 2nd-
curtain synchronization.

• With the EOS 30/ELAN 7E, set C.Fn-6-1.

Set the picture-taking mode with
the camera.

• <Tv > or <M > is recommended.

Take the picture.

• Focus the subject, check that the

<'<> icon is lit in the viewfinder, then
take the picture.

Q • Setting <buLb> for the shutter speed makes 2nd-curtain synchronization easier.

• Second-curtain synchronization cannot be used in the <D> (Full Auto) or in a

Programmed Image Control mode.

29

Advertising