Flash in full auto mode – Canon Speedlite 420EX User Manual

Page 32

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Flash in Full Auto Mode

aesaumaiìaiaiu^^

With the 420EX attached to a Type-B camera set to <P> (Program AE),
flash photography will be fully automatic and as easy as normal AE

photography without flash. The camera sets the shutter speed and aperture

automatically to suit the lighting situation, whether it is dark or daylight (fill
flash). TTL autoflash thereby sets the flash exposure automatically.

1

Set the camera to <P> (Program

AE).

EC 5.6

i

3

4

32

Focus the subject.

• The shutter speed and aperture

settings are displayed in the
viewfinder and on the LCD panel.

• The sync speed is set automatically

anywhere from 1/60 sec. to the

camera's fastest sync (varies
depending on the camera). The

aperture is also set automatically.

(->page 52)

Take the picture.

• Check that the <'/> icon is lit in the

viewfinder, then take the picture.

Check that the flash exposure
confirmation lamp lights.
• When a correct flash exposure has

been obtained, the lamp lights for
about 3 sec.

If it does not light, underexposure

may have occurred. Check that the

<PILOT> is lit, then move closer to
the subject and take the picture

again.

Advertising