Canon E 250 User Manual
Canon
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- Canon
- Table of Contents
- Camera Parts and Functions
- Dual-mode Buttons DSj|
- Using Battery Pack
- BP-E77KIBEI/BP-E722 (option) | Battery Pack
- Attaching Battery Pack lEgl
- 1. Slide battery pack into power source compartment.
- 2. Press battery pack until it clicks and locks in place.
- Removing Battery Pack
- 1. Slide and hold ВАТТ EJECT switch up.
- 2. Pull battery pack out, as shown.
- Charging Battery Pack
- Using AC Power
- CA-100 Compact Power Adapter
- Using Car Battery
- CB-110 Car Battery Adapter (option)
- Attaching DC Coupler lEEl
- 1. Insert DC-100 DC Coupler into power source compartment.
- 2. Connect DC-100 cable to compact power adapter (or car battery adapter).
- 1. Turn camera on by pressing OPERATE button.
- 2. Press and hold SET button for more than 3 seconds. BKl
- 3. Press + and - buttons to scan year display.
- 4. Press SHIFT button when correct year is shown.
- 5. Press + and - buttons to scan month display.
- 6. Press SHIFT button when correct month is shown.
- 7,9
- 12
- Camera Preparations
- Attaching Strap
- SS-300 Shoulder Strap BigSl
- WS-20 Wrist Strap (option) gan
- Adjusting Diopter 27-a
- Adjusting 180'' FiexiGrip with Integral Electronic Vievrfinder 27-B
- Sports Finder 27-c •
- 1. Attach power source.
- 2. Turn camera on.
- 3. Press EJECT button.
- 4. Load video cassette and close video cassette compartment.
- 5. Press SP/LP button to select tape mode.
- 6. Turn grip to desired position.
- Tape Counter
- Recording Reminder
- Video Cassette Warning з2-а
- Battery Pack Warning з2-в
- About Backlighting 32-c
- Recording Using Tripod 32-D
- Record Search (Assembly Editing) (CAMERA Mode)
- 1. Place camera in record pause mode, icicgl
- 2. Press -f or - button to scroll forward or backward to locate recording start position.
- 3. Press start/stop button.
- Record Review (camera Mode)
- 1. Place camera in record pause mode. icgRl -
- 2. Press Cs] button.
- 3. Press start/stop button to resume recording.
- Record search (to resume recording)
- Record review jcHSl
- Recording Date and Time (camera Mode)
- 1. Place camera in record pause mode, icngii
- 2. Press DATE button to select display for recording as follows:
- 3. Make your recording as normal.
- Subjects Not Suitable for Autofocus
- Manual Focus
- 1. Press AF/MANUAL button to select manual focus.
- 2. Rotate zooming lever to telephoto end.
- 3. Look through viewfinder and rotate focusing ring to focus on subject
- 4. Use zooming iever to frame subject properly.
- Focus Lock
- Macro ROCOrdiriQ (camera Mode)
- 1. Press AF/MANUAL button to select manual - focus.
- 2. Rotate zooming lever to wide-angle end.
- 3. Press and hold macro button on zooming lever and move lever into macro range.
- 4. Approach subject to desired size in viewfinder.
- 5. Use zooming lever within macro range for fine focusing.
- 6. When macro recording is completed, reverse steps 2 and 3.
- Power Zoom 41-A
- Manual Zoom 4i-b
- Wireless Zoom 4i-c
- What is White Balance?
- Auto White Balance
- Subjects Not Suitable for Auto White Balance 42-a
- White Balance Lock
- 2,4
- White Balance Lock Procedure
- 1. Point camera lens at a white ol^ect (such as a sheet of paper) for 10 seconds, so it completely fills viewfinder.
- 2. Press AWB/LOCK/GAIN UP button.
- 3. Make your recording.
- 4. Press AWB/LOCK/GAIN UP button again to reset auto white balance.
- Attaching Video Light 44-a
- 1. Insert video light plug into accessory shoe on the camera.
- 2. Slide video light into accessory shoe until it stops.
- Removing Video Light 44-b
- 1. Press and hold lock release button.
- 2. Slide video light out of accessory shoe.
- Shooting with Video Light
- 1. Place camera in record pause mode. Etf-l
- 2. Press video light power button.
- 3. Press start/stop button to start shooting.
- 1. Press and hold AWB/LOCK/GAIN UP button for more than 3 seconds.
- 2. Make your recording.
- 3. Press AWB/LOCK/GAIN UP button for more than 3 seconds to cancel gain-up.
- 1. Point camera at subject and compose scene in viewfinder.
- 2. Press SHUTTER button.
- 3. Make your recording.
- 4. Press SHUTTER button to return to normal shutter speed.
- Wireless Fade
- 1. Place camera in record pause mode. iaa?i
- 2. Press F. START/STOP button.
- 3. When scene is recorded, press F. START/STOP button again.
- 1. Place camera in record pause mode.
- 2. Press SELF/INT. button.
- Press + and - buttons to select desired mode.
- 4. Press start/stop button to start recording.
- 5. Press start/stop button again to stop recording.
- Creating Character Titles
- 1. Place camera in CAMERA mode.
- 2. Press SET button to display title lines in viewfinder.
- 3. Press SHIFT button to move the cursor to position where you want to start the title,
- 4. Use + and - buttons to scan list of title characters.
- 5. When the character you want is displayed, press SHIFT button again to move to next cursor position. ^2]
- 6. Follow steps 4 and 5 until your title is complete.
- 7. When the title is finished, press SET button.
- 2. Press C. TITLE button to select the type of scrolling you want:
- 3. Press SET button.
- Creating Digital Titles
- 1. Place camera in CAMERA mode.
- 2. Frame your image and press MEMO button.
- 3. Press COLOUR button to select desired colour.
- 3,4
- 3,4
- Playback Connection (play Mode)
- Using TV with Audio/Video Input Terminals
- Connection Procedure
- Connection Procedure
- a
- Using TV with SCART Terminal
- Connection Procedure STll^l©
- Connection Procedure
- Selecting Video Channel (European model)
- 1. Turn TV on.
- 2. Turn camera on.
- 3. Press MODE SELECT button to select PLAY mode.
- 4. Press >■ (PLAY) button to start playback.
- 5. Set RF unit’s G/l selector using flat-edge screwdriver.
- 6. Set TV and video channel selector to video channel (video channel selector is factory-set to CH 32).
- Selecting Video Channel (Australian model)
- 1. Turn TV on.
- 2. Turn camera on.
- 3. Press MODE SELECT button to select PLAY mode.
- 4. Press >■ (PLAY) button to start playback.
- 5. Set TV and video channel selector to video channel (video channel selector is factory-set to 1CH) using a flat-edge screwdriver.
- 1. Turn camera on.
- 2. Press MODE SELECT button to select PLAY mode.
- 3. Press EJECT button.
- 4. Load video cassette in camera and close video cassette compartment.
- 5. Locate playback start point.
- 6. Press > (PLAY) button to start playback.
- 7. Press ■ (STOP) button to end playback.
- 8. Turn camera off.
- PLAY Mode
- High-Frequency Feedback
- Special Playback Methods
- Editing to Another VTR (PLAY Mode)
- Carrying Cases
- Optional Accessories
- CB-110 Car Battery Adapter
- BP-E722 Battery Pack
- MC-100 Multi-battery Charger
- RS-60 Rain Shield
- VL-20 Battery Video Light
- TL-37 Tele-converter
- WD-37 Wide-converter
- FS-37 Filter Set
- FS-37U Filter Set
- MM-200 Stereo Mixing Microphone
- ZM-100 Stereo/Zoom Microphone
- MB-100 Microphone Boom
- SA-1 Adapter Bracket
- Problems and Troubleshooting
- Condensation (DEW)
- Cautions
- B
- H
- F. Always Replace the Lens Cap.
- G. Do Not Expose the Camera to Shock or Vibrations.
- H. Avoid Sudden Changes in Temperature.
- I. Do Not Disassemble the Camera.
- J. Using the Battery Pack and Recommended Accessories.
- Using Your Battery Packs Effectively
- Immediately After Purchase
- General Use
- storage
- Terminology
- Maintenance
- Keep the Heads Clean.
- Clean the Camera with a Soft, Dry Cloth.
- Store the Camera Properly.
- Store Cassette Tape Properly. '
- Check the Operation of Each Component.
- Specifications
- Canon