Setting the time, Dispiay the date and ■ time, Select the time setting – Canon SURE SHOT 105 ZOOM S User Manual
Page 44: Set the time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Date and Time
Setting the Time
Dispiay the date and
■ time.
• Press the DATE button to
display the date and time.
H 42)
• You cannot set the date
when the date and time are
both displayed
Select the time setting.
• Press the SELECT button to
select the setting.
^ The selected setting
(blinking numbers)
changes sequentially from
hour to minute to second
(colon “:").
Set the time.
• Press the SET button to set
the time.
• If you press the SELECT
button and the colon “:"
does not blink, time setting
is complete.
■ Each time you replace the battery, the date display on
the LCD panel reverts to "......... ”. When this occurs,
set the date and time.
• Holding the button down for 2 seconds or more
causes the setting to change continuously.
• If you press the SET button when the colon ": ” is
blinking, the seconds display is set to zero.
11-44