Data entry ok, Repeat steps 4 and 5 as needed, When the operation is complete, press [stop – Canon B550 User Manual
Page 45: Entering a number
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Registering your name and number
5
After selecting or entering a value, press [START/
COPY],
START/COPY
DATA ENTRY OK
Repeat steps 4 and 5 as needed.
When the operation is complete, press [STOP],
Registration ends and the I'AXPHONEi leltims to
standhv mode.
STOP
After fit) see. w ith no operation panel input, the FAXPHONE returns to
standby mode and anv unrecistcred changes are lost.
Entering a number
Whenex er you are prompted to enter a lax number or a telephone number, follow these
procedures.
Use the numeric buttons to enter the number.
TEL=
I
You can enter up to 20 digits for your fax number or 100 digits for a speed dialing
n umber.
I
Be sure to enter I and the area code, if necessary, to dial a different area code.
I
Do not enter dashes, slashes, commas, or other punctuation.
f.'se the one-touch speed dialing buttons as follows:
I
To enter a space between numbers, press |.SPACE|.
I
If you make a mistake, press 1CLHAR| and enter the number again.
I
To erase a pre\ iously registered number, press |CEEAR|. You can also enter a new
number oxer the old one.
’ you need to enter a pause for any reason.
Press IP.ALJSEl at the desired point in the sequence when entering a series of
digits.
\
pause w ithin a number is 2 seconds long. The length of this pause can be
adjusted, see MID PAUSE SET in TX SETTINGS, pg.88. A pause at the end of
a number is fixed at 10 seconds.
,
"
;/:з
.....‘
C)
3
:з
ЬС
..V
rr.:C;.S ...
33