Dial the other party's fax numher, Press [start/copy, Cancelling sending – Canon B550 User Manual
Page 72: Tx/rx no. xxxx, Memory input p01, Redialing, Manual, Automatic, To cancel automatic redialing, Cancelling sending redialing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4
Dial the other party's fax numher.
Use one of the dialing nielhods deserihed ealier in
this ehapler (see pg.55).
TEL= 9876543333
Press [START/COPY],
The FAXPHONE seans the doeutnent into memory
and heeins sendine.
START/COPY
Cancelling sending
TX/RX NO. XXXX
Isec.
MEMORY INPUT P01
To stop sending before the fax is finished, press ¡STOP]. Then you may need to open
the operation panel to remove the doeumetit. see Clearing document jams, pg.62.
Redialing
■ Manual
To start dialing again, just press |REDIAL|,
(When you press [REDIAL], the previ
ous number dialed with the numeric buttons is redialed.)
■ Automatic
The FAXPHONE automatically redials twice after the first attempt at sending fails
(eg. the line was busy).
The time between redials is two minutes.
You can change the number of redials and the time between redials by changing the
TX SETTINGS (see pg.88).
If the FAXPHONE fails to get through after the second redial, the FAXPHONE beeps.
The LCD displays REDIALING while the FAXPHONE is in the redialing process.
REDIALING
■ To cancel automatic redialing
You can cancel automatic redialing anytime by pressing the [STOP] button.
However, when memorv is used during sending (including Delayed Sending and Se
quential Broadcasting), you can no) cancel redialing while REDIALING is displayed
ott the LCD.
In this case, wait until dialing begins atid press |STOP|, you can cancel redialing.
60