Cabletron Systems Expansion module 9F125-08 - Manual (Page 11)

9
9F120-08 / 9F122-12 / 9F125-08 Module Specific Information
Module Specific Configuration Screen
In the FNB Resource Configuration Screen, you determine which of the two FNB
rings contains the MAC. The
9F120 MicroLAN Module Specific Configuration
Screen allows you to assign one of the two FNB rings (either the ring that contains
the MAC or the ring that does not contain the MAC) to each of the module’s M-
ports. The default ring that is assigned to each of the module’s M-ports is the ring
that contains the MAC.
Figure 1. 9F120 MicroLAN Module Specific Statistics Screen
To assign an FNB ring to a module’s M-port:
1. Use the arrow keys to highlight the PATH field next to the desired port.
2. Press the SPACE BAR to toggle to the desired ring (either MAC-1 or No
MAC).
3. Press the Return key. Repeat steps 1-3 to assign an FNB ring to other M-ports.
4. Use the arrow keys to highlight SAVE at the bottom of the screen and press
the Return key. When the message “SAVED OK” appears, the edits you have
made are saved. If you exit without saving, the message “NOT SAVED --
PRESS SAVE TO KEEP CHANGES” appears. If you proceed to exit without
saving, your edits will be lost.
5. Use the arrow keys to highlight RETURN and press the Return key.
SmartSwitch 9000 LOCAL MANAGEMENT
Module Specific Configuration
Module Name: 9F120-08 Firmware Revision: 01.01.01
Slot Number: 12 BOOTPROM Revision: 00.00.04
FNB 1 Pri. (MAC) Ins. , FNB 2 Pri. (No MAC) Ins.
PORT# PATH CONNECT STATE
1 [MAC-1] CON
2 [MAC-1] CON
3 [MAC-1] CON
4 [MAC-1] CON
5 [MAC-1] CON
6 [MAC-1] CON
7 [MAC-1] CON
8 [MAC-1] CON
SAVE RETURN