Press + and - buttons to scan minute, Display, Press set button when correct minute is shown – Canon E 230 User Manual
Page 24: Measm, Press + and - buttons to scan minute display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
20 МАЯ?ТЧ9Э
2 : 3 5 P M
2 0 M A R . 1 9 9 3
11. Press + and - buttons to scan minute
display.
___
• Minute display rotates through 60 minutes. EB
|-»00 ■«-» 01 ■«-> 02 ■«-» ——■«-> 58 ■«-»• 59<-j
12. Press SET button when correct minute is
shown.
• Minute display stops flashing and auto date and time starts
functioning.
measM
•
Press DATE button to make display disappear from
viewfinder.
24
Notes:
•
The date can be set between 1 January, 1992, and December 31, 2010.
• Date and time cannot be set during camera recording or in PLAY mode.
• When you change or remove lithium battery, date and time are cleared from memory and must be
reset.
• Reset date and time when you travel to a different time zone.
• To make a partial change to date or time settings, follow steps 1 and 2 on page 21. Then press SHIFT
button to select settings to change. When finished, press SET button.