Csmera rocording (camera mode), Attach power source, Turn camera on – Canon E 230 User Manual
Page 28: Press eject button, Press sp/lp button to select tape mode, Turn grip to desired position, Csmera rocording, Mode), Camera
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Csmera Rocording (
camera
Mode)
L
PAUSE
1. Attach power source.
• When using a battery pack, make sure it is fuliy charged
(see p. 17).
2. Turn camera on.
• Mode indicator iights up red.
____
• ‘TAPE” flashes in viewfinder (see p. 32).
3. Press EJECT button.
• Video cassette compartment opens.
• EJECT button works with the power turned off, if the battery
pack is attached.
4. Load video cassette and close video cassette
compartment.
• Use an 8mm video cassette marked with an El (P5 type).
• Camera goes into record pause mode. K:gii
5. Press SP/LP button to select tape mode.
• For best picture quality, select SP.
• For double recording time, select LP.
6. Turn grip to desired position.
• See p. 27 for adjusting grip.
28