Canon E 230 - Manual (Page 30)

Video Cassette Notes
Do not leave video cassette in camera after
use, especially when the camera will not be in
use for a long time.
There are several holes on the video cassette
back, which are used for transferring
information. Do not cover them with adhesive
tape or other materials.
Do not use video cassettes with damaged or
spliced tape or ones that do not meet
standards.
To protect your video cassette put it in the
plastic case, after use. Do not store video
cassettes where they may be exposed to high
temperatures, high humidity, direct sunlight,
magnetic fields, dust or mould.
Video cassette erasure prevention
switch IcggI
To prevent accidental erasure of recorded
material, slide switch at bottom of video
cassette as shown. If switch is returned to its
original position, recording is possible once
again.
Refer to video cassette instruction manual for
more information about erasure prevention.
• In the CAMERA mode, if you load a video
cassette that is set for erasure prevention,
‘TAPE” flashes In the viewfinder.
Use another video cassette or set switch to
enable recording.
O To save: Erasure Prevention
9 To record: Recording Possible
30