White balance lock procedure, Press awb/lock/gain up button, Make your recording – Canon E 230 User Manual
Page 43: White baiance lock procedure co
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
DO
m
o
O
J3
g
z
o
White Balance Lock Procedure
1
Point camera lens at a white object (such as a
sheet of paper) for 10 seconds, so it completely
fills viewfinder.
• Set zooming lever to telephoto end.
• Be sure sufficient lighting is available.
• There Is no need for focusing.
2. Press AWB/LOCK/GAIN UP button.
• “WB LOCK” appears in viewfinder. EKgii
3. Make your recording.
4. Press AWB/LOCK/GAIN UP button again to
reset auto white balance.
• ‘WB LOCK” disappears from viewfinder.
Note:
•
Pressing the
AWB/LOCK/GAIN
UP button for
more than 3 seconds
engages gain-up function.
43
Advertising