Alumax 793 Buttress Supplement User Manual
793 buttress supplement, Instructions, Installation instructions
Advertising
EPH-N00-06074
12-17-97
Instructions
Radius the 180° post as
desired using a file or band saw.
Place the 180° post inside the curb
against the buttress wall and secure
with one #8 x 1 1/2" Truss Head
Screw. Snap the 90° snap post
into the 180° post securely. Push
the buttress curb into the 90° snap
post.
NOTE: It is recommended to
glaze the return panel into the
buttress curb with one strip of the
horizontal glazing vinyl (provided)
on the outside of the glass and a
bead of caulk on the inside.
INSTALLATION
INSTRUCTIONS
793 Buttress Supplement
CURB
BUTTRESS
CURB
RADIUS
AS
NEEDED
90° SNAP
POST
180° POST
Copyright © Alumax Bath Enclosures 1997. All rights reserved.
Advertising