Alumax Deluxe Towel Bar User Manual

Deluxe towel bar, Bath enclosures, A product of alcoa

Advertising
background image

EPH-N00-06046

10-21-05

PAGE 1 OF 1

DELUXE TOWEL BAR

INSTALLATION INSTRUCTIONS

2

3

Place a nylon handle bushing [D] (length determined

by the glass thickness) over the shank of a towel bar cap
[B]. Slip a rubber washer [C] over the bushing. Insert
the cap and bushing into a 1/2" hole in one of the doors.
Place a second rubber washer against the opposite
surface of the glass, position the threaded towel bar base
[E] over it and attach it securely with a #8 flat head screw
[F]. Repeat for the other end of the bar.

Hold the acrylic towel bar assembly against the

threaded handle bases and screw the outer handle rings
onto the bases. Do not overtighten or use tools that might
damage the finish.

1

Place one outer towel bar ring [J] and one inner

towel bar ring [H] over on end of the Acrylic Bar [A].
Slide the rings past the groove in the bar and snap a
retaining ring [G] into the groove. Repeat for the other
end of the bar.

T-bar bushings and assembly screws are supplied in two
different lengths to fit .188"/.250" or .375" thick glass door
panels.

PARTS LIST

A. 1 7/8" Dia. Cast Acrylic Towel Bar
B. 2 1 3/8" Dia. Towel Bar Cap
C. 4 1 1/8" Rubber Towel Bar Gasket
D. 2 3/8" x 3/16" Long Nylon Towel Bar Bushing

2 3/8" x 3/8" Long Nylon Towel Bar Bushing

E. 2 1 1/4" Dia. Threaded Towel Bar Base

F. 2 #8 x 7/16" Flat Head Screw

2 #8 x 5/8" Flat Head Screw

G. 2 Retaining Ring
H. 2 1 1/8" Inner Towel Bar Ring

J. 2 1 1/2 Outer Towel Bar Ring

BATH ENCLOSURES

a product of Alcoa

Tel:

Fax:

800-643-1514
870-234-3181

www.alumaxbath.com

Advertising