Salter Brecknell CS Series Crane - Manual (Page 8)

8
2. Press the RC F1 key…
U X.XX is displayed. This stands for the voltage.
3. Press the RC MR key again to cancel the display and return to normal
weighing mode.
Turning the Scale Off
To turn the scale off, press and hold the ON/OFF key or RC OFF key until the
unit beeps. The scale will briefly show the battery voltage and then will turn off.
Adjusting the Display Brightness
To set the brightness of the display, follow these steps:
1. Press the RC F1 key…
bL=X is displayed. X stands for the brightness level (X =1 through 5).
2. Press the RC F1 key to increment the brightness. When the level you
want is shown, stop pressing the key and the display will automatically
return to normal weighing mode.