Salter Brecknell MS20 (Rev A) - Manual

A copy of the original signed declaration for this instrument is available
from the below UK address:
Electromagnetic Compatibility Statement for North America
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet different from that to which the receiver is
connected.
Consult the dealer or an experienced radio / TV technician for help .
USER MANUAL
Model MS-20
IN-0787 3014F
Declaration of Conformity
Manufacturer Salter Brecknell
Type MS-20
Corresponds to the requirements of the following EC directives
Electro Magnetic Compatibility Directive EMC 89/336/EEC
Low Voltage Directive LVD 73/23/EEC
The application harmonised standards are: EN60950,
EN50081-1
EN50082-1
Salter Brecknell Weighing
UK & Europe
PO box 9533, Smethwick,
West Midlands, B66 2TE
United Kingdom
Tel: +44 (0) 870 444 6132
Fax: +44 (0) 870 010 2241
Email: sales @salterbrecknell.co.uk
Salter Brecknell Weighing
Products USA
1000 Armstrong Drive,
Fairmont, MN56031
Toll Free: 800-637-0529
Phone: 507-238-8702
Fax: 507-238-8271
Email: [email protected]
www.salterbrecknell.com