Code 3 MR6 - Manual

120523
To + VDC (fuse @ 3A):
To Chassis Ground:
For Synchronization:
Connect YELLOW wires of all heads together for synchronization
(All heads must be set at the same pattern)
For Simultaneous or Alternating Flash:
1. Apply +VDC to RED and YELLOW wires simultaneously to enter
Grouping mode; lighthead will display short (single or double) flashes:
Single flash = Group1 Double flash = Group2
2. Remove YELLOW wire from +VDC and momentarily apply to +VDC
to change Groups:
Heads in the same Group flash together.
Group1 Heads alternate with Group2 Heads.
YELLOW
BLACK
RED
For Flash Pattern, momentarily
apply +VDC to YELLOW wire:
once for next pattern
quickly three times for reset
(see flash pattern chart)
Surface Mount
1 Single (2Hz)
2 Double (2Hz)
3 Triple (2Hz)
4 Quad (2Hz)
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Random
Single (split)
Double (split)
Quad (split)
Quint (split)
Mega (split)
Ultra (split)
Single-Quad (split)
Single H/L (split)
Single (all)
Double (all)
Quad (all)
Quint (all)
Mega (all)
Ultra (all)
Single-Quad (all)
Single H/L (all)
Steady 2 (california)
Steady 4 (all)
Flash Patterns