Code 3 Z3 HUB - Manual

T56877 Revision 0 1
Z3 Hub
Installation Manual
The Z3 Hub can be used with Code 3 CAT-5 cables: T56649 (20 Feet), T56650 (2
Feet). Any off the shelf CAT-5 cable can be substituted for use with the Z3 Hub. Each
CAT-5 connection in the Z3 Hub is identical. Any of the six connections can be used to
connect different systems (Z3 Amplifier, Z3-SWIF, vLink, etc.) to the Z3 Hub.
Any combination of approved Z3 System products can be used to fill the six
connections. (See block diagram below.)
For further questions, please contact our Technical Hotline @ (314) 966-2800.
Z3-SWIF Z3 Amplifier vLink
Only Approved
Z3 System Products
Only Approved
Z3 System Products
Only Approved
Z3 System Products
Z3 Hub
Z3 Control Head
Port4 Port6 Port5
Port1 Port3 Port2