Code 3 Z3 SWIF - Manual

INSTALLATION MANUAL
Z3-SWIF
STEERING WHEEL INTERFACE - FORD PI UTILITY & SEDAN
Read all instructions and warnings before installing and using.
This manual must be delivered to the end user of this equipment.
IMPORTANT:
For future reference record your product's serial no. here __________________________________________
INSTALLER:
Mount the Z3 Steering Wheel Interface Box in the desired location using (2) user supplied screws. Note: This box
should not be mounted on the exterior of the vehicle!
Connect the Z3-SWIF Input Control wires according to the chart below.
Z3-SWIF INPUT CONTROL WIRING CHART
Z3-SWIF INPUT WIRE 14 WAY POLICE BASE SIGNAL POWER CONNECTOR
ORANGE/BLACK STRIPE POLICE 4 BUTTON CONTROLLER---BUTTON 1 OUTPUT
ORANGE POLICE 4 BUTTON CONTROLLER---BUTTON 2 OUTPUT
BLUE/BLACK STRIPE POLICE 4 BUTTON CONTROLLER---BUTTON 3 OUTPUT
BLUE POLICE 4 BUTTON CONTROLLER---BUTTON 4 OUTPUT
ADDITIONAL Z3-SWIF CONTROL INPUT WIRING
Z3-SWIF INPUT WIRE OPTIONAL CONNECTIONS
GRAY/BLACK STRIPE OPTIONAL GROUNDED SWITCH (E.G. HIDDEN GUN LOCK)
GRAY OPTIONAL GROUNDED SWITCH (E.G. REMOTE ACTIVATION SWITCH)
BLACK/RED STRIPE NOT USED (NO CONNECTION)
BLACK NOT USED (NO CONNECTION)