Habey FW-1044 - Manual (Page 2)

Install Guide
Unpack all package contents and inspect
each component. Make sure all included
parts and accessories are present.
Step 1 - Inspect Contents
Using a phillips head screw driver, remove
the six screws on the sides of the enclosure,
and then remove the single screw at the top
rear of the enclosure.
Step 2 - Remove Top Cover
Remove the four screws and then remove
the two brackets.
Step 3 - Mounting a 2.5” Drive
Mount the HDD onto the bracket and then fix
it with four screws.
Mount the completed bracket to the
enclosure and connect the SATA cables.