Hollywood Racks PS6 Bike Valet - Manual

ASSEMBLY INSTRUCTIONS FOR THE
HOLLYWOOD PS-6 BIKE VALET
PARKING SYSTEM
LIST OF MATERIALS:
Qty Description
2 Side Angle Braces
2 Straight Braces
1 Parking Frame
1 Poly Bag containing the
following parts:
8 ¼ - 20 x 2- 1/2” bolts
8 ¼ - 20 self locking nuts
16 ¼” SAE washers
ASSEMBLY PROCEDURE:
1. Align the parking frame
with the center holes,
of the side angle braces
2. Align the straight braces
with the holes on the
side angles, insert bolts.
3. Tighten all bolts and nuts securely.
Tools required for assembly:
Two 6” adjustable wrenches
Limited One Year Warranty: This rack is warranted for a period of one year against defects in materials
and workmanship, effective from the date of purchase to the original purchaser. The manufacturer will
repair or replace any defective parts due to materials or workmanship. The manufacturer of this product
shall not extend the warranty to 1) Any failure or malfunction of the product do to any of or
modifications to the product; or 2.) Damages not attributable to a defect in materials or workmanship; or
3.) Damages resulting from improper installation on vehicle or attachment of bicycles on rack.
Consequential or Incidental Damages: The manufacturer shall not be liable for any consequential or
incidental damages in connection with the purchase, use or handling of this bike rack. Purchaser’s
Rights: Some states do not allow the exclusion or limitation of consequential or incidental damages and
the above limitation may not apply to you. This warranty gives you specific legal rights and you have
other rights, which vary from state to state.
Hollywood Engineering Inc.
12812 S Spring Street Los Angeles, CA 90061
(800) 747-4085 or (310) 516-8600 FAX (310) 516-8955
www.hollywoodracks.com Made in Taiwan