Home Legend Hardwood and Bamboo T-molding User Manual

Home Legend Furniture

Advertising
background image

Doc.ID: 148

Effective: 8-8-2013

Title: Installation Hardwood/Bamboo T-molding

Rev.:0

Hardwood and Bamboo T-molding

T-molding transition piece is used to transition between floors of similar heights. They often used to provide

expansion gaps for large areas or for when the floor is interrupted by wall openings or permanent fixture such

as a kitchen island. There are several ways to accomplish the task of installing T- molding. This is just one of

them.

Step 1.

Determine where the T-Molding will be installed. The usual location is

between two sections of flooring. Mark an area the width of the T-

post of the molding plus the required expansion gap on either side of

the post.

Step 2.

Apply adhesive to area where the foot of the T-molding will be secured

to the subfloor.

Step 3.

Secure the T-mold in place by pressing it down into the adhesive beads

and press down to secure completed bond between the T-post and the

subfloor.

Step 4.

Allow the glue to cure. Follow glue manufacturer’s instruction for

length of cure time.

Advertising