Lights, Multifunction lever – Jeep 2012 Wrangler Unlimited - Owner Manual User Manual

Page 151

Advertising
background image

To close the hood, remove the support rod from the hood
panel and place it in the retaining clip. Lower the hood
slowly. Secure both of the hood latches.

WARNING!

Be sure the hood is fully latched before driving your
vehicle. If the hood is not fully latched, it could open
when the vehicle is in motion and block your vision.
Failure to follow this warning could result in serious
injury or death.

LIGHTS

Multifunction Lever
The multifunction lever controls the operation of the
parking lights, headlights, headlight beam selection,
passing light, fog lights, instrument panel light dimming
and turn signals. The lever is located on the left side of
the steering column.

Multifunction Lever

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

149

Advertising
This manual is related to the following products: