Cooper Lighting L1973 - Manual

325
TRACK
LIGHTING
Accessories
COOPER LIGHTING
HALO ®
L 9 1 8 , L 9 3 6 , L 9 4 8 E x t e n s i o n
W a n d s
For use with most lampholders
(excluding those with integral
electronic transformers, HID
lampholders except L5300 or some
Para Trac [L3218, L3232, L3239]
lampholders) and trac. May also be
used with L2001 Solid State Adapter,
L967 or L968 Switches or, with L963, in
4 Circuit Trac.
NOT FOR USE WITH LAZER TRACK
LAMPHOLDERS
L918-18” length; L936-36” length;
L948-48” length.
Finish: White (P), Black (MB)
L 9 1 7 S l o p e A d a p t e r s
Allows use of extension wands on
sloped or cathedral ceilings. 0°-90°.
Max Extension: 4 3/4” (121mm)
Finish: White (P), Black (MB)
L 9 7 3 C a n o p y A d a p t e r
Mounts permanently to outlet box.
4 1/2” sq. Not for use with electronic
low voltage lampholders, HID
lampholders or ParaTrack
lampholders except for the following:
L2005, L5038, L5300, L3240E, L3250E,
L3255E
Finish: White (P), Black (MB)
L 9 7 2 C C l a m p A d a p t e r
Can be mounted on pipe up to 2”
dia. or any flat protruding surface.
Complete with 6’ 3-wire cord with
3-prong grounded plug.
Finish: White (P), Black (MB)
L 1 9 7 4 W e i g h t e d B a s e
A d a p t e r
For portable use. May also be used
with L2001 and L2004 Adapter and
low voltage lampholders. Padded
base 5 3/8” sq. Complete with 6’
3-wire cord with 3-prong grounded
plug. Rotary on-off switch.
Finish: White (P), Black (MB)
L 1 9 7 3 L o w Vo l t a g e
C a n o p y A d a p t e r
Allows use of L2001 and L2004
Solid State Adapter or
lampholders with integral solid
state transformer in canopy
mount installations. Also for
use with L3218, L3232, L3239,
L5300, L5130 & L5138. Mounts
permanently to junction box.
5 3/8” sq.
Finish: White (P), Black (MB)
L 9 5 6 S h o w r o o m F i x t u r e
A d a p t e r
Note: Single Circuit only
Allows canopy mounted fixture
(chandelier, etc.) to be suspended
from track. Will hold up to 35 lbs.
Can be switched on and off via track
or by pull chain on adapter.
Finish: White (P)
4 7 7 Tr a c A d a p t e r Tr i m
For use with Halo H7, H7R and H44
recessed housings. Allows Trac
lampholders to be used with
recessed installations. Not for use
with any solid state/electronic low
voltage, HID lampholders or
fluorescent lampholders. Up to 150W
maximum.
Finish: Black Baffle with White Trim
Ring (P), White Baffle with
White Trim Ring (W)
L252, L352 Media Holders
Allows use of L400 series color filters and Cube
cell louvers with L1830 (L252) and L1838 (L352)
Media Holder
L252MB L352MB
Med. Pink filter L411 L211
Warm Red filter L412 L212
Daylight Blue filter L420 L220
Medium Blue filter L421 L221
Medium Amber filter L431 L231
Medium Green filter L441 L241
UV filter L414 L214
Cube Cell L274 L275
Finish: Black (MB)