Ram Trucks UCONNECT 430 for Chrysler - Manual (Page 12)

3 — RADIO
Push the RADIO button located on the faceplate to
change to a RADIO mode or to toggle between RADIO
modes:
• AM
• FM
• SAT (If Equipped)
NOTE:
If you are viewing the NAV screen (Uconnect®
430N only), pushing the RADIO button will return you to
the RADIO mode screen.
4 — MEDIA
Push the MEDIA button located on the faceplate to
change to a MEDIA mode or to toggle between MEDIA
modes:
• HDD (Hard Disk Drive)
• CD/DVD
• AUX
NOTE:
If you are viewing the NAV screen (Uconnect®
430N only), pushing the MEDIA button will return you to
the MEDIA mode screen.
5 — ON/OFF VOLUME
It is also possible to set the unit in standby mode while
driving by pushing the ON/OFF VOLUME rotary knob.
NOTE:
If the ignition is switched OFF with the radio in
standby mode, the radio memorizes the standby state
when the ignition is switched ON again. Push the ON/
OFF VOLUME rotary knob to switch the radio ON. The
radio software is always working when the ignition is
switched ON, even if the radio is in standby mode. It is
still possible to eject the CD and to display the time if the
unit is switched OFF.
3
GENERAL HANDLING 11