Cisco OL-11528-01 - Manual (Page 10)

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Statistics
8-10
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
OL-11528-01
Network Statistics
The following network statistics hyperlinks on a phone’s web page provide
information about network traffic on the phone. To display a network statistics
area, access the web page for the phone as described in the
“Accessing the Web
Page for a Phone” section on page 8-2 .
• Ethernet Information—Displays information about Ethernet traffic. Table 8-3
describes the items in this area.
• Access—Displays information about network traffic to and from the PC port
(10/100/1000 PC) on the phone.
Table 8-4 describes the items in this area.
• Network—Displays information about network traffic to and from the
network port (10/100/1000 SW) on the phone.
Table 8-4 describes the items
in this area.
Auto Line Select Indicates whether the phone shifts the call focus to incoming calls on all lines.
DSCP for Call Control DSCP IP classification for call control signaling.
DSCP for
Configuration DSCP IP classification for any phone configuration transfer.
DSCP for Services DSCP IP classification for phone-based services.
Security Mode Displays the security mode that is set for the phone.
Web Access Enabled Indicates whether web access is enabled (Yes) or disabled (No) for the phone.
Span to PC Port Indicates whether the phone will forward packets transmitted and received on
the network port to the access port.
PC VLAN VLAN used to identify and remove 802.1P/Q tags from packets sent to the
PC.
Table 8-2 Network Configuration Area Items (continued)
Item Description