Cisco WIRELESS ACCESS POINT WAP4410N - Manual (Page 18)

Connecting the Cisco WAP4410N Access Point
Connecting the Cisco WAP4410N Access Point to the Network
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 18
4
The lights on the front panel light up as soon as the Cisco WAP4410N Access
Point powers on.
Using a Standard Switch or Router
To connect the Cisco WAP4410N to your network using a standard switch or
router, follow these steps.
STEP 1 Use the supplied Ethernet cable to connect the Ethernet port of the access point
to an Ethernet port on the switch.
STEP 2 Connect the included power adapter to the Power port of the Cisco WAP4410N
Access Point.
STEP 3 Plug the power adapter into an electrical outlet.
The lights on the front panel light up as soon as the Cisco WAP4410N Access
Point powers on.