Chauvet SCORPION GVC - Manual (Page 14)

Page 14 of 26 Scorpion™ GVC/RVM/RGY User Manual (Rev. 02k)
4. O
PERATION
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the
display.
Button Function
<MENU>
Press to find an operation mode or
to back out of the current menu
option
<DOWN>
Press to scroll down the list of
options or to find a lower value
<UP>
Press to scroll up the list of options
or to find a higher value
<ENT>
Press to activate a menu option or a
selected value
Menu Branches
The menu structure of the Scorpion™ GVC/RVM/RGY fixtures has seven branches,
as follows:
• Auto/Sound (13 option)
• Laser Sky Color (4 options)
• Laser Sky Effect (1 option)
• Sound Sensitivity (10 options)
• DMX address (503 options)
• Slave (1 option)
• Reverse (2 options with two values each)
• The control panel will remember the last setting you programmed, even
after you have turned the fixture off.
• In addition, the control panel will remember the last selected option from
each menu branch.
Changing Options on the Current Menu Branch
To change an option on the same menu branch, do the following:
1) Press <MENU> once (the LED display will blink).
2) Press <UP> or <DOWN> until the desired menu option shows on the LED
display.
3) Press <ENT> to accept the new option (the new option will show solid on the LED
display).
Changing Options on a Different Menu Branch
To change an option on a different menu branch, you must exit the current branch.
1) Press <MENU> once (the LED display will blink).
2) Press <MENU> repeatedly until seeing the active option of the desired menu
branch.
3) Press <UP> or <DOWN> until the desired menu option within the new menu
branch shows on the LED display.
4) Press <ENT> to accept the new option (the new option will show solid on the LED
display).