Losi LOSA1757 - Manual

A1757
Front Outer Brace
A1756
Adjustment Cam
A6500
Hinge Pin
A4427
Front Bulkhead
A1757
Front Inner Brace
Decrease Kick-Up
Down Position
Up Position
Increase Kick-Up
Up Position
Decrease Kick-Up
Down Position
Increase Kick-Up
Remove the Bulkhead from the chassis.
Remove the existing Hinge Pin Braces and plastic covers.
Select the desired Adjustment Cam and press it into the new Adjustable Hinge Pin Braces.
*Note the position of the number on the outside of the Cam. Always install the same number Cam in the same orientation on each side
of the car.
Install the Inner Adjustable Hinge Pin Brace re-using the mounting hardware.
Align the Arms and Hinge Pins with the Adjustment Cam.
Install the Outer Adjustable Hinge Pin Brace re-using the existing hardware.
Re-attach the bulkhead to the chassis.
Check the suspension to ensure it moves freely and does not bind.
•
•
•
•
•
•
•
•
•
LOSA 1757
Adjustable Hinge Pin Brace Install STEP A-01
800-0420
Front Kick-Up Angle Adjustment
Outer Front Brace Inner Front Brace
Total
Kick-Up
Insert
Position
Insert
Number
Insert
Position
Insert
Number
Up 1° Down 1° +2°
Up 0.5° Down 0.5° +1°
Middle 0° Middle 0° 0°
Down 0.5° Up 0.5° -1°
Down 1° Up 1° -2°