Losi LOSA1758 User Manual

Losa

Advertising
background image

Decrease Toe-In

Inside Position

Outside Position

Increase Toe-In

Up Position

Increase Anti-Squat

Down Position

Decrease Anti-Squat

Rear Inner Brace

A1758

Adjustment Cam

A1756

Rear Outer Brace

A1758

Hinge Pin

A6500

A4450

Rear Bulkhead

Remove the Bulkhead from the chassis.

Remove the existing Hinge Pin Braces and plastic covers.

Select the desired Adjustment Cam and press it into the new Adjustable Hinge Pin Braces.

*Note the position of the number on the outside of the Cam. Always install the same number Cam in the same orientation on each side

of the car.

Install the Inner Adjustable Hinge Pin Brace re-using the mounting hardware.

Align the Arms and Hinge Pins with the Adjustment Cam.

Install the Outer Adjustable Hinge Pin Brace re-using the existing hardware.

Re-attach the bulkhead to the chassis.

Check the suspension to ensure it moves freely and does not bind.

Rear Toe-In Adjustment

Insert

Position

Insert

Number

Total

Toe-In

Inside

Inside

0.5°

2.5°

Middle

0

Outside

0.5°

3.5°

Outside

Rear Anti-Squat Adjustment

Insert

Position

Insert

Number

Total

Anti-Squat

Up

Up

0.5°

2.5°

Middle

0

Down

0.5°

1.5°

Down

LOSA

1758

Adjustable Hinge Pin Brace Install

STEP A-01

800-0421

Advertising