Craftsman 316.350850 - Manual (Page 4)

RULES FOR SAFE OPERATION
• Avoid accidental starting. Be in the starting position
whenever pulling the starter rope. The operator and unit
must be in a stable position while starting. See
Starting/Stopping Instructions.
• Before you start the engine, make sure the area around
the saw is clear. Never try to start the saw when the
guide bar is engaged in a cut.
• Do not start cutting until you have a clear work area,
secure footing, and a planned retreat path from the
falling tree.
• Do not operate a chain saw that is damaged, improperly
adjusted, or not completely and securely assembled. Be
sure that the saw’s chain stops moving when the throttle
control trigger is released.
• Shut off the engine before setting the chain saw down.
• Use extreme caution when cutting small-sized brush
and saplings because slender material may catch the
chain saw and whip towards you or cause you to lose
control.
• When cutting a limb that is under tension, be alert for
springback so that you will not be struck when the ten-
sion in the wood fibers is released.
• Do not cut through nails, rods in the tree, railroad ties or
pallets. Inspect a tree that you are going to cut for for-
eign objects that could cause injury or damage to your
chain saw.
• After striking a foreign object, stop the engine and thor-
oughly inspect for damage. Repair as necessary.
• Keep the handles dry, clean and free of the oil/fuel mix-
ture.
• We do not recommend using the chain saw in a tree or
on a ladder.
MAINTAIN YOUR SAW IN GOOD WORKING ORDER
• All chain saw service, other than the items listed in this
instruction manual maintenance instructions, should be
performed by a Sears or other qualified service dealer.
• Make sure all fasteners are in place and secure.
• Unauthorized replacement parts or the removal of safety
devices may cause damage to the unit and possible
injury to the operator or bystanders. Use only Craftsman
accessories and replacement parts as recommended.
Never modify your saw.
• When not in use, saw should be stored in a dry, highly
secure location away from children.
• When storing saw use a scabbard or carrying case.
HANDLE FUEL WITH CAUTION
• Do not smoke while handling fuel or while operating the
saw.
• Always eliminate all sources of sparks or flame in areas
where fuel is mixed or poured.
• Always mix and pour fuel in an outdoor area and use an
approved, marked container for all fuels. Always wipe
up all fuel spills before starting saw.
• When a chain saw is being used, a fire extinguisher
should be available.
• Always move at least 10 feet (3 meters) from fueling site
before starting saw.
• When re-fueling, turn the engine off and allow the saw to
cool in a non-combustible area, do not place on dry
leaves, straw, paper, etc. Slowly remove fuel cap and
refuel unit.
• Always store the unit and fuel in a cool, dry, well-venti-
lated space where fuel vapors cannot reach sparks or
open flames from water heaters, electric motors or
switches, furnaces, etc.
• All chain saw service, other that the items listed in this
instruction manual maintenance instructions, should be
performed by a Sears or other qualified service dealer.
• Use the right tool. Only use this chain saw for its intend-
ed purpose, to cut wood.
• Never touch the chain or attempt to service the saw
while the engine is running. Make sure all moving parts
have stopped. Allow the chain saw to cool, as the chain
can be hot.
• Check the bar and chain at frequent intervals for proper
adjustment. Make sure the bar and chain are properly
tightened and sharpened. Visually inspect for damage.
Repair any damage before restarting or operating the
chain saw.
KICKBACK SAFETY PRECAUTIONS
• With a basic understanding of kickback, you can reduce
or eliminate the element of surprise. Sudden surprise
contributes to accidents. Be alert to the potential for
kickback at all times.
• Keep a good firm grip on the saw with both hands, the
right hand on the rear handle and the left hand on the
front handle, when the engine is running. Use a firm grip
with thumbs and fingers encircling the chain saw handles.
A firm grip will help you reduce kickback and maintain
control of the saw. Don’t let go.
KICKBACK may
occur when the
nose or tip of the guide bar touches an
object, or when the wood closes in and
pinches the saw chain in the cut. Tip con-
tact in some cases may cause a lightning-
fast reverse reaction, kicking the guide bar
up and back towards the operator. Pinching
the saw chain along the top of the guide bar
may push the guide bar rapidly back toward
the operator. Either of these reactions may
cause you to lose control of the saw, which
could result in serious personal injury. Do
not rely exclusively upon the safety devices
built into your saw. As a chain saw user,
you should take several steps to keep your
cutting jobs free from accident or injury.
WARNING:
4
READ ALL INSTRUCTIONS
PLAN AHEAD
• Read the instructions carefully. Be familiar with the con-
trols and proper use of the unit.
• Do not operate this unit when tired, ill or under the influ-
ence of alcohol, drugs or medication.
• Children must not operate the unit. Teens must be
accompanied and guided by an adult.
• Only responsible individuals who are familiar with the
instructions may operate the chain saw (no one under
the age of 16). Provide parental supervision at all times.
• Secure hair above shoulder length. Do not wear loose
clothing or jewelry; they can get caught in moving parts.
• Inspect the unit before use. Replace all damaged parts
prior to starting. Make sure the unit is in original operat-
ing condition before starting.
• Know the controls and know how to stop the chain saw
quickly.
• Carry the chain saw with the engine stopped, the guide
bar and saw chain to the rear, and the muffler away
from your body.
• When transporting your chain saw, use the appropriate
guide-bar scabbard (sheath).
• Wear protective gear. Always use steel-toed safety
footwear with non-slip soles; snug-fitting clothing;
heavy-duty non-slip gloves; eye protection such as
non-fogging, vented goggles or face screen; an
approved safety hard hat; and hearing protection.
Regular users should have hearing checked regularly as
chain saw noise can damage hearing.
OPERATE YOUR SAW SAFELY
• Do not operate a chain saw that is damaged, not cali-
brated properly or not fully assembled. Always replace
chain, bar, chain brake, and other parts immediately if
damage occurs.
• Do not apply excess force to the chain saw at the end
of the cut. You may lose control of the unit when the cut
has been completed.
• Keep all parts of your body away from the chain when
the engine is running.
• Never start or run the unit inside a closed room or
building. Operate this unit only in a well ventilated out-
door area.
• Use the unit only in daylight or good artificial light.
RULES FOR SAFE OPERATION
SYMBOL MEANING The purpose of safety symbols is to attract your atten-
tion to possible dangers. The safety symbols, and their
explanations, deserve your careful attention and under-
standing. The safety warnings do not by themselves
eliminate any danger. The instructions or warnings they
give are not substitutes for proper accident prevention
measures.
NOTE: Advises you of information or instructions vital to
the operation or maintenance of the equipment.
SYMBOL MEANING
If correctly used, the
chain saw is a
quick, easy to handle and efficient tool; if
used improperly or without the due precau-
tions it could become a dangerous tool. For
pleasant and safe work,always strictly com-
ply with the safety rules that are contained in
this manual.
WARNING:
• IMPORTANT SAFETY INSTRUCTIONS •
Failure to obey a
safety warning can
result in injury to yourself and others. Always
follow the safety precautions to reduce the
risk of fire, electric shock and personal
injury.
WARNING:
Failure to obey a safety
warning will result in
serious injury to yourself or to others. Always
follow the safety precautions to reduce the
risk of fire, electric shock and personal injury.
DANGER:
Failure to obey a safe-
ty warning may result
in property damage or personal injury to
yourself or to others. Always follow the safe-
ty precautions to reduce the risk of fire, elec-
tric shock and personal injury.
CAUTION:
Indicates
danger,
warning or caution. Attention is required in
order to avoid serious personal injury. May
be used in conjunction with other symbols
or pictographs.
SAFETY ALERT:
Read the Operator’s Manual(s) and follow all warnings
and safety instructions.
Failure to do so can result in serious injury to the oper-
ator and/or bystanders.
3