Using do not disturb – Cisco Cisco Unified Wireless IP Phone 7921G User Manual
Page 50
42
OL-16131-01
Tips
•
Enter the call forward target number exactly as you would dial it from your phone. For example,
enter an access code or the area code, if necessary.
•
You can forward your calls to a traditional analog phone or to another IP phone, although your
system administrator might restrict the call forwarding feature to numbers within your company.
•
Call forwarding is phone line specific. If a call reaches you on a line where call forwarding is not
enabled, the call will ring as usual.
•
Your system administrator can enable a call forward override feature that allows the person
receiving your forwarded calls to reach you. With override enabled, a call placed from the target
phone to your phone is not forwarded, but rings through.
•
Your phone may reject your attempt to set up Call Forward All directly on the phone if the target
number that you enter would create a call forwarding loop or would exceed the maximum number
of links permitted in a call forwarding chain.
Using Do Not Disturb
You can use the Do Not Disturb (DND) feature to turn off only the ringer on your phone or to turn
off all audible and visual notifications of incoming calls. Your system administrator enables DND for
your phone.
When DND and Call Forward are both enabled on your phone, calls are forwarded and the caller does
not hear a busy tone.
DND interaction with other types of calls includes:
•
DND does not affect intercom calls or non-intercom priority calls.
Verify that Call Forward
All is enabled on your
primary line
Look for both of these indicators:
•
The
icon next to the primary line.
•
The call forward target number in the status line.
Set up or cancel call
forwarding remotely, or for
a non-primary line on your
phone
1.
Log in to your User Options web pages. (See
User Options Web Pages, page 87
2.
Access your call forwarding options. (See
Note
When call forwarding is enabled for any line other than the
primary line, your phone does not provide you with confirmation
that calls are being forwarded. Instead, you must confirm your
settings in the User Options web pages.
If you want to...
Then...