Cisco Cisco Unified Wireless IP Phone 7921G - Manual (Page 56)

48 OL-16131-01
Placing or Receiving Intercom Calls
You can place an intercom call to a target phone that auto-answers the call in speakerphone mode with
mute activated. The one-way intercom call allows you to deliver a short message to the recipient. If
the recipient’s handset or headset is in use, the audio is sent to the device in use. Any current call
activity that your recipient is engaged in continues simultaneously.
The target destination receives an intercom-alert tone and can then choose to:
• Listen to the caller by selecting the intercom line with microphone muted (you can hear the caller,
but the caller cannot hear you).
• End the intercom call by pressing the EndCall softkey. Do this if you do not want to hear the
message.
• Talk to the caller by selecting the intercom line, and use either the handset, headset, or speaker.
The intercom call becomes a two-way connection so that you can talk with the caller.
When using the intercom feature, be aware of the following:
• From an intercom line, you can only dial other intercom lines.
• You can use only one intercom line at a time.
• When your active call is being monitored or recorded, you cannot receive or place intercom calls.
• You cannot place an intercom call on hold.
See who initiated the
conference While viewing the conference list, locate the participant listed at the
bottom of the list with an asterisk (*) next to the name.
Remove any conference
participant While viewing the conference list, highlight the participant’s name
and choose Options > Remove.
You can remove participants only if you initiated the conference.
Drop the last participant
added to the conference While viewing the conference list, highlight the participant’s name
and choose Options > RmLstC.
You can remove participants only if you initiated the conference call.
Verify that a conference call is
secure Look for the or icon after “Conference” on the phone
screen.
Verify that a participant is
calling from a secure phone Look for the or icon beside the participant’s name on the
phone screen.
Add more participants See Using Conference, page 44 .
End your participation in a
conference Choose , EndCall, or Options > EndCall.
If you want to... Then...