Using the application button – Cisco Cisco Unified Wireless IP Phone 7921G User Manual

Page 71

Advertising
background image

Advanced Call Handling

Cisco Unified Wireless IP Phone 7921G Phone Guide for Cisco Unified Communications Manager 7.0

63

Tips

When calling Mobile Voice Access, you need to enter the number you are calling from in addition
to the PIN if any of the following are true:

The number you are calling from is not one of your remote destinations.

The number is blocked by you or your carrier (shown as “Unknown Number”).

The number is not accurately matched in the Cisco Unified Communications Manager
database; for example, if your number is 510-666-9999, but it is listed as 666-9999 in the
database, or your number is 408-999-6666, but it is entered as 1-408-999-6666 in the
database.

If you incorrectly enter any requested information (such as mobile phone number or PIN) three
times in a row, the Mobile Voice Access call disconnects, and you are locked out for a period of
time. Contact your system administrator if you need assistance.

Using the Application Button

The Application Button

(on left side of phone) can be used to start applications such as Push to

Talk or other services on your phone.

Depending on how the Application Button is configured by your system administrator, you may be
able to use it from the main phone screen only, or you may use it from any menu or service, or even
when the phone is locked.

Make a call from your
mobile phone

See

Placing a Call—Additional Options, page 33

.

Turn off Mobile Connect
from your mobile phone

1.

Dial your assigned Mobile Voice access number.

2.

Enter your mobile phone number (if requested) and PIN.

3.

Press 3 to disable Mobile Connect.

4.

Choose whether to turn Mobile Connect off for all configured
phones or just one:

All phones—Enter 2.

One phone—Enter 1 and enter the number you want to
remove as a remote destination, followed by #.

Turn on or off Mobile
Connect access to all your
remote destinations from
your wireless IP phone

1.

Press Mobility to display the current remote destination status
(Enabled or Disabled).

2.

Press Select to change the status.

3.

Press Exit.

If you want to...

Then...

Advertising