Old Town ACS Seat Replacement Kit - Manual

Rev. Orig
Issue Date: 1/14/2010
Doc. # K-07.1982.0000
Johnson Outdoors
125 Gilman Falls Rd Building B
Old Town, Maine 04468
1-800-8-KAYAKS
http://www.neckykayaks.com
ACS Seat
Replacement Kit
Page 1 of 4
* Note - This kit is to replace boats that contain a standard Extrasport seat with Deck
Brackets. This kit will not work for Ratchet style seats*
TOOLS REQUIRED: Phillips Screwdriver, or Screw gun with Phillips Head Bit, Drill with ¼” bit.
Please read and understand all of the instructions before attempting installation
Step 1: Remove Old Seat:
1. Remove the old seat by backing out the 4 bolts on the sides of the cockpit using a screw gun with a
Phillips Head bit or a Phillips Head screw driver. With the 4 Bolts removed take the seat out of the
cockpit.
2. Place Seat (A) in boat. Insert 1”1/4-20 Truss Bolt (E) through a 1/4” Bonded Washer (F) then through
the Bow most seat hole. Repeat on the other side of the Cockpit. See Fig. #1 & Fig. #2
2.A For Old Town Models – Use the 1 ¼” ¼-20 Truss Bolts (D) and the ¼-20 Stamped Washers (C) .
Fig. #1 Fig. #2
KIT CONTENTS
Ref. Letter Part Number Description Quantity
A
07.3238.0000 ACS Seat Assembly 1
B 07.2000.0556 Seat Stabilizer 2
C
01.1315.1547 ¼-20 Stamped Washer 4
D 07.2890.0000 ¼-20x1 ¼” Truss Bolt 4
E
01.1315.1603 ¼-20x1” Truss Bolt
4
F 07.2118.0000 ¼” Bonded Sealing Washer 4
G
01.1315.2592 Deck Brackets 2
H 1.1331.0845 Seat Bungee 1
A
B
C
D
E
F
G
H