Canon DC 20 - Manual (Page 82)

82
POWER SAVE: In order to save power when the camcorder is powered by a battery
pack, it will automatically shut off if left without any operation for five minutes.
Approximately 30 seconds before the camcorder shuts off, “
AUTO POWER OFF”
appears in the center of the screen.
FILE NOS.: Select the image numbering method to be used on a new memory card or
disc.
Images are automatically assigned consecutive image numbers from 0101 to 9900, and
stored in folders containing up to 100 images. Folders are numbered from 101 to 998.
[RESET]: Image numbering will start anew from 101-0101 every time you insert a new
memory card or disc. If it already contains image files, a new image will be given the
number following that of the last image on the memory card or disc.
[CONTINUOUS]: Image numbering will start from the number following that of the last
image recorded with the camcorder. If the memory card or disc already contains an image
with a larger image number, a new image will be given the number following that of the
last image on the recording media.

The [CONTINUOUS] image numbering method is useful for organizing images on a
computer as it minimizes the chance of two images being assigned the same image
number. We recommend using this setting.
 The [FILE NOS.] setting is common to the memory card and the disc.
Date/Time Setup
D/TIME SET
DATE FORMAT: Changes the displayed date format (including the date format for
printing).
T.ZONE/DST
26
DATE/TIME
DATE FORMAT Y.M.D (2005.1.1 AM12:00),
M.D,Y (JAN. 1, 2005 AM12:00),
D.M.Y (1.JAN.2005 AM12:00)
Menu Items Setting Options
CAMERA PLAY
DC 20_10_PAL-E.book Page 82 Friday, September 2, 2005 6:36 PM