Erasing still images, Erasing a single image, Erasing a single image after recording – Canon DC 20 User Manual
Page 92
92
Erasing Still Images
You can erase still images recorded on the memory card or on the disc (DVD-RW only),
one at a time or all at once.
Be careful when erasing images. Erased images cannot be recovered.
Protected images on the memory card and images on a protected disc cannot be
erased.
Erasing a Single Image
Still images recorded on the disc: This option is only available with DVD-RW discs
recorded in VR mode.
1. Set the camcorder to view still images (
).
2. Press the FUNC. button.
3. First, select (
) the [
IMAGE ERASE] symbol and press (
).
4. Select (
) the [ERASE] option and press (
) to erase the still
image.
5. Press the FUNC. button to close the menu.
Erasing a Single Image After Recording
You can erase the still image you recorded last while you are reviewing it immediately
after recording it. Still images on the disc: This option is only available with DVD-RW discs
(VIDEO or VR mode).
1. While reviewing the image immediately after recording it press the
FUNC. button.
2. First, select (
) the [
IMAGE ERASE] symbol and press (
).
3. Select (
) the [ERASE] option and press (
) to erase the still
image.
4. Press the FUNC. button to close the menu.
(
57)
IMAGE ERASE
(
57)
IMAGE ERASE
DC 20_10_PAL-E.book Page 92 Friday, September 2, 2005 6:36 PM