Torbal AGS100 250C PRO Manual - Manual

TABLE OF CONTENTS
1. Cautionary Notes and Precautions
1.1. Important Safety Warnings
1.2. HOT Parts and Surfaces
1.3. More Cautionary Notes and Precautions
2. Specifications
3. Introduction
3.1. Function of the Moisture Analyzer
3.2. Good Practices and General Rules
4. Keys, Display Indicators, Commands, and Abbreviations
5. Parts Description
6. Unpacking the Moisture Analyzer and Getting Started
7. Understanding the Functions, Parameters, and Modes
7.1. Methods of Terminating the Moisture Analysis
7.2. Understating Configuration Parameters
8. Configuration and Parameter Setting for Moisture Analysis
8.1. Mode
8.2. Calculation Formula
8.3. Drying Temperature
8.4. Sample Quantity
8.5. Sampling Interval
8.6. Drying Time
8.7. Saving the Configuration and Parameters
9. RAP Configuration
10. Preparing the Sample
10.1. Using a Glass Fibre Filter
11. Making a Moisture Analysis
12. Setting Drying Parameters for Unknown Samples
13. Loading Saved Parameters and Configuration
14. Report Printing
15. Testing the Analyzer with Sodium Tartrate Dihydrate
16. Weighing
16.1. Taring
16.2. Clearing the Tare
17. Parts Counting
17.1. Using a Custom Sample Size
17.2. Counting Based on a Known Individual Piece Weight
18. Calibration
19. Main Menu
19.1. Autotaring
19.2. RS232 Serial Port Configuration
19.3. Print Adjustment
19.4. Time and Date
19.5. Language
19.6. LCD Setting
20. Halogen Replacement and Maintenance of the Moisture Analyzer
21. Technical Information
22. Common Errors and Troubleshooting
23. Replacement Parts
24. Limited Warranty